/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.c
  * @brief          : Main program body
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2025 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"

#include <time.h>
#include <stdlib.h>

#include "string.h"
#include "E52.h"
#include "E104-BT5005A.h"
//上船测试版本
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */

/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */

/* USER CODE END PD */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */

/* USER CODE END PM */

/* Private variables ---------------------------------------------------------*/
UART_HandleTypeDef huart1;
UART_HandleTypeDef huart2;
UART_HandleTypeDef huart3;
DMA_HandleTypeDef hdma_usart2_rx;
DMA_HandleTypeDef hdma_usart3_rx;

/* USER CODE BEGIN PV */
uint8_t rx_buf[100] = {0};
uint8_t rx_buf_uart2[100] = {0};
uint8_t totalData[120][50] = {0};
uint8_t uart2_rx_byte[10] = {0};
uint8_t loraSendNextDataFlag = 0;
uint8_t baseRandomTimer = 3*60;
uint8_t RandomTimer= 3*60;
// uint8_t loraDataErrorCount = 0;
uint8_t workMode = 0;  // 0: 接收蓝牙数据 1: 使用lora发生数据 2:等待间隔时间
uint8_t receiveBlDataCount = 0;

uint8_t newLoraDataFlag = 0;  //接收lora数据成功标志位。1：有新数据来。0.表示等待接收数据。后续可以改成队列类型。

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
static void MX_DMA_Init(void);
static void MX_USART1_UART_Init(void);
static void MX_USART2_UART_Init(void);
static void MX_USART3_UART_Init(void);
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
#include <stdio.h>

// 重定向fputc函数到USART1
// int _write(int file, char *ptr, int len)
// {
//   HAL_UART_Transmit(&huart1, (uint8_t*)ptr, len, HAL_MAX_DELAY);
//   return len;
// }
//
// int fputc(int ch, FILE *f)
// {
//   uint8_t c = ch;
//   HAL_UART_Transmit(&huart1, &c, 1, HAL_MAX_DELAY);
//   return ch;
// }

int __io_putchar(int ch)
{
  uint8_t c = ch;
  HAL_UART_Transmit(&huart1, &c, 1, HAL_MAX_DELAY);
  return ch;
}

void sentLoraData(uint8_t  sendDataNum) {
  HAL_UART_Transmit(&huart2, totalData[sendDataNum], 8, HAL_MAX_DELAY);
}

uint16_t randomFun() {
  return rand() % RandomTimer + baseRandomTimer; //随机时间1分钟到3分钟之间随机数
}

// 进入睡眠模式
void EnterSleepMode(void)
{
  // 确保所有外设操作完成
  HAL_Delay(10);

  // 清除所有挂起的中断，防止立即唤醒
  // __HAL_IRQ_CLEAR_PENDING(EXTI0_IRQn);

  // 进入睡眠模式，任何中断都能唤醒
  HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
  // 或者使用WFE指令：HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFE);
}
/* USER CODE END 0 */

/**
  * @brief  The application entry point.
  * @retval int
  */
int main(void)
{
  /* USER CODE BEGIN 1 */

  /* USER CODE END 1 */

  /* MCU Configuration--------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_DMA_Init();
  MX_USART1_UART_Init();
  MX_USART2_UART_Init();
  // MX_USART3_UART_Init();
  /* USER CODE BEGIN 2 */
  // 启动 USART2 DMA 接收
  // HAL_UART_Receive_DMA(&huart3, rx_buf, sizeof(rx_buf));
  // // HAL_UART_Receive_IT(&huart2, uart2_rx_byte, 7);
  // // 使能 USART2 空闲中断
  // __HAL_UART_ENABLE_IT(&huart3, UART_IT_IDLE);
  HAL_UART_Receive_DMA(&huart2, rx_buf_uart2, sizeof(rx_buf));
  // HAL_UART_Receive_IT(&huart2, uart2_rx_byte, 7);
  // 使能 USART2 空闲中断
  __HAL_UART_ENABLE_IT(&huart2, UART_IT_IDLE);
  HAL_Delay(2000);
  // printf("开始初始化\r\n");
  // printf("切换为观察者模式\r\n");
  // E104_BT5005A_ROLE_Fun();
  // HAL_Delay(2000);
  // printf("初始化扫描间隔\r\n");
  // E104_BT5005A_SCANINTV_Fun();
  // HAL_Delay(2000);
  // printf("初始化扫描窗口\r\n");
  // E104_BT5005A_SCANWND_Fun();
  // HAL_Delay(2000);
  // printf("初始化复位\r\n");
  // E104_BT5005A_RESET_Fun();
  // HAL_Delay(2000);

  printf("开启Lora广播模块");
  const char *lora_msg = "AT+OPTION=3,0";
  HAL_UART_Transmit(&huart2, (uint8_t *)lora_msg, strlen(lora_msg), HAL_MAX_DELAY);
  HAL_Delay(2000);
  const char *lora_msg1 = "AT+TYPE=1";
  HAL_UART_Transmit(&huart2, (uint8_t *)lora_msg1, strlen(lora_msg1), HAL_MAX_DELAY);
  HAL_Delay(2000);
  const char *lora_msg2 = "AT+MAC=?";
  HAL_UART_Transmit(&huart2, (uint8_t *)lora_msg2, strlen(lora_msg2), HAL_MAX_DELAY);
  HAL_Delay(2000);
  const char *lora_msg3 = "AT+HEAD=0";
  HAL_UART_Transmit(&huart2, (uint8_t *)lora_msg3, strlen(lora_msg3), HAL_MAX_DELAY);
  HAL_Delay(2000);
  // MAC=0x0569a82a

  // uint16_t count = 0;
  // uint16_t randomTime = 0;
  srand(HAL_GetTick());


  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */

  while (1)
  {
    /* USER CODE END WHILE */
    /* USER CODE BEGIN 3 */

    // if (workMode == 0) {  // 接收蓝牙数据
    //   printf("接收中第%d秒，接受了%d位数据\r\n", count, receiveBlDataCount);
    //   if (count > 30 || receiveBlDataCount >= 115) { //搜10秒数据
    //     E104_BT5005A_SLEEP_Fun();
    //     HAL_Delay(5);//等待蓝牙模块进入睡眠模式
    //     // receiveBlDataCount = 0;
    //     workMode = 1;
    //     count = 0;
    //   }else {
    //     count++;
    //   }
    // }else if (workMode == 1) { // 发送数据给Lora
    //   if (count < receiveBlDataCount)
    //   {
    //     printf("发送第%d个数据,总数据大小为%d\r\n", count,receiveBlDataCount);
    //     // 启动 USART2 DMA 接收
    //     sentLoraData(count);
    //     if (loraSendNextDataFlag == 0 || loraSendNextDataFlag > 3) {
    //       memset(totalData[count], 0, sizeof(totalData[count]));
    //       count++;
    //       memset(rx_buf_uart2, 0, 100);
    //       loraSendNextDataFlag = 0;
    //     }else  {
    //       printf("send error!\r\n");
    //     }
    //   }else {
    //     printf("发送结束,总数据大小为%d\r\n",receiveBlDataCount);
    //     const char *end_msg = "SENDEND\r\n";
    //     HAL_UART_Transmit(&huart2, (uint8_t *)end_msg, strlen(end_msg), HAL_MAX_DELAY);
    //     receiveBlDataCount = 0;
    //     workMode = 2;
    //     count = 0;
    //   }
    // }else if (workMode == 2) {
    //   printf("等待进度：%d\r\n", count);
    //   printf("等待时间%d秒\r\n",randomTime);
    //   if (randomTime == 0) {
    //     randomTime = randomFun();
    //   }
    //   if (count > randomTime) {
    //     E104_BT5005A_WAKE_UP_Fun();
    //     randomTime = 0;
    //     workMode = 0;
    //     count = 0;
    //   }else {
    //     count++;
    //   }
    // }
    // if (workMode == 1) {
    //   HAL_Delay(300);
    // }else {
    //   HAL_Delay(1000);
    // }

    while (1) {
      // printf("Hello world:%d\r\n",i);
      // //睡眠测试　－－
      // i++;
      // if (i == 15) {
      //   HAL_SuspendTick();   // 停止 SysTick 中断
      //   __WFI();             // 真正进入 Sleep
      //   HAL_ResumeTick();    // 唤醒后恢复 SysTick
      // }
      // HAL_Delay(1000);
      // //睡眠测试　－－
      // printf("Hello world:%d\r\n",newLoraDataFlag);
      if (newLoraDataFlag == 1) {
        E52_Analyze_Data();
        newLoraDataFlag = 0;//重置状态
      }
      // HAL_Delay(500);
    }
  }
  /* USER CODE END 3 */
}


/**
  * @brief System Clock Configuration
  * @retval None
  */
void SystemClock_Config(void)
{
  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};

  /** Initializes the RCC Oscillators according to the specified parameters
  * in the RCC_OscInitTypeDef structure.
  */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
  RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
  {
    Error_Handler();
  }

  /** Initializes the CPU, AHB and APB buses clocks
  */
  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV2;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;

  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
  {
    Error_Handler();
  }
}

/**
  * @brief USART1 Initialization Function
  * @param None
  * @retval None
  */
static void MX_USART1_UART_Init(void)
{

  /* USER CODE BEGIN USART1_Init 0 */

  /* USER CODE END USART1_Init 0 */

  /* USER CODE BEGIN USART1_Init 1 */

  /* USER CODE END USART1_Init 1 */
  huart1.Instance = USART1;
  huart1.Init.BaudRate = 115200;
  huart1.Init.WordLength = UART_WORDLENGTH_8B;
  huart1.Init.StopBits = UART_STOPBITS_1;
  huart1.Init.Parity = UART_PARITY_NONE;
  huart1.Init.Mode = UART_MODE_TX_RX;
  huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
  huart1.Init.OverSampling = UART_OVERSAMPLING_16;
  if (HAL_UART_Init(&huart1) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN USART1_Init 2 */

  /* USER CODE END USART1_Init 2 */

}

/**
  * @brief USART2 Initialization Function
  * @param None
  * @retval None
  */
static void MX_USART2_UART_Init(void)
{

  /* USER CODE BEGIN USART2_Init 0 */

  /* USER CODE END USART2_Init 0 */

  /* USER CODE BEGIN USART2_Init 1 */

  /* USER CODE END USART2_Init 1 */
  huart2.Instance = USART2;
  huart2.Init.BaudRate = 115200;
  huart2.Init.WordLength = UART_WORDLENGTH_8B;
  huart2.Init.StopBits = UART_STOPBITS_1;
  huart2.Init.Parity = UART_PARITY_NONE;
  huart2.Init.Mode = UART_MODE_TX_RX;
  huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
  huart2.Init.OverSampling = UART_OVERSAMPLING_16;
  if (HAL_UART_Init(&huart2) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN USART2_Init 2 */

  /* USER CODE END USART2_Init 2 */

}

/**
  * @brief USART3 Initialization Function
  * @param None
  * @retval None
  */
static void MX_USART3_UART_Init(void)
{

  /* USER CODE BEGIN USART3_Init 0 */

  /* USER CODE END USART3_Init 0 */

  /* USER CODE BEGIN USART3_Init 1 */

  /* USER CODE END USART3_Init 1 */
  huart3.Instance = USART3;
  huart3.Init.BaudRate = 115200;
  huart3.Init.WordLength = UART_WORDLENGTH_8B;
  huart3.Init.StopBits = UART_STOPBITS_1;
  huart3.Init.Parity = UART_PARITY_NONE;
  huart3.Init.Mode = UART_MODE_TX_RX;
  huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE;
  huart3.Init.OverSampling = UART_OVERSAMPLING_16;
  if (HAL_UART_Init(&huart3) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN USART3_Init 2 */

  /* USER CODE END USART3_Init 2 */

}

/**
  * Enable DMA controller clock
  */
static void MX_DMA_Init(void)
{

  /* DMA controller clock enable */
  __HAL_RCC_DMA1_CLK_ENABLE();

  /* DMA interrupt init */
  /* DMA1_Channel3_IRQn interrupt configuration */
  HAL_NVIC_SetPriority(DMA1_Channel3_IRQn, 0, 0);
  HAL_NVIC_EnableIRQ(DMA1_Channel3_IRQn);
  /* DMA1_Channel6_IRQn interrupt configuration */
  HAL_NVIC_SetPriority(DMA1_Channel6_IRQn, 0, 0);
  HAL_NVIC_EnableIRQ(DMA1_Channel6_IRQn);

}

/**
  * @brief GPIO Initialization Function
  * @param None
  * @retval None
  */
static void MX_GPIO_Init(void)
{
  /* USER CODE BEGIN MX_GPIO_Init_1 */

  /* USER CODE END MX_GPIO_Init_1 */

  /* GPIO Ports Clock Enable */
  __HAL_RCC_GPIOD_CLK_ENABLE();
  __HAL_RCC_GPIOA_CLK_ENABLE();
  __HAL_RCC_GPIOB_CLK_ENABLE();

  /* USER CODE BEGIN MX_GPIO_Init_2 */

  /* USER CODE END MX_GPIO_Init_2 */
}

/* USER CODE BEGIN 4 */
// void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
// {
//   // if (huart->Instance == USART2) // 判断是USART2
//   // {
//   //   // 这里处理接收到的数据，例如打印出来
//   //   // printf("USART2 Received: %s\r\n", uart2_rx_byte);
//   //
//   //   // 继续接收下一个字节
//   //   HAL_UART_Receive_IT(&huart2, uart2_rx_byte, 7);
//   // }
// }

/* USER CODE END 4 */

/**
  * @brief  Period elapsed callback in non blocking mode
  * @note   This function is called  when TIM3 interrupt took place, inside
  * HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment
  * a global variable "uwTick" used as application time base.
  * @param  htim : TIM handle
  * @retval None
  */
void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
{
  /* USER CODE BEGIN Callback 0 */

  /* USER CODE END Callback 0 */
  if (htim->Instance == TIM3)
  {
    HAL_IncTick();
  }
  /* USER CODE BEGIN Callback 1 */

  /* USER CODE END Callback 1 */
}

/**
  * @brief  This function is executed in case of error occurrence.
  * @retval None
  */
void Error_Handler(void)
{
  /* USER CODE BEGIN Error_Handler_Debug */
  /* User can add his own implementation to report the HAL error return state */
  __disable_irq();
  while (1)
  {
  }
  /* USER CODE END Error_Handler_Debug */
}
#ifdef USE_FULL_ASSERT
/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t *file, uint32_t line)
{
  /* USER CODE BEGIN 6 */
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
  /* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */