/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.c
  * @brief          : Main program body
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2025 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"

#include <time.h>
#include <stdlib.h>

#include "string.h"
#include "E52.h"
#include "E104-BT5005A.h"
//上船测试版本
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */

/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */

/* USER CODE END PD */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */

/* USER CODE END PM */

/* Private variables ---------------------------------------------------------*/
TIM_HandleTypeDef htim4;

UART_HandleTypeDef huart1;
UART_HandleTypeDef huart2;
UART_HandleTypeDef huart3;
DMA_HandleTypeDef hdma_usart2_rx;
DMA_HandleTypeDef hdma_usart3_rx;

/* USER CODE BEGIN PV */
uint8_t rx_buf[100] = {0};
uint8_t rx_buf_uart2[100] = {0};
uint8_t totalData[120][50] = {0};
uint8_t uart2_rx_byte[10] = {0};
uint8_t loraSendNextDataFlag = 0;
uint8_t baseRandomTimer = 3*60;
uint8_t RandomTimer= 3*60;
// uint8_t loraDataErrorCount = 0;
uint8_t workMode = 0;  // 0: 接收蓝牙数据 1: 使用lora发生数据 2:等待间隔时间
uint8_t receiveBlDataCount = 0;

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
static void MX_DMA_Init(void);
static void MX_USART1_UART_Init(void);
static void MX_USART2_UART_Init(void);
static void MX_USART3_UART_Init(void);
static void MX_TIM4_Init(void);
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
#include <stdio.h>

int __io_putchar(int ch)
{
  uint8_t c = ch;
  HAL_UART_Transmit(&huart1, &c, 1, HAL_MAX_DELAY);
  return ch;
}

void sentLoraData(uint8_t  sendDataNum) {
  HAL_UART_Transmit(&huart2, totalData[sendDataNum], 8, HAL_MAX_DELAY);
}

uint16_t randomFun() {
  return rand() % RandomTimer + baseRandomTimer; //随机时间1分钟到3分钟之间随机数
}

// 进入睡眠模式
void EnterSleepMode(void)
{
  // 确保所有外设操作完成
  HAL_Delay(10);

  // 清除所有挂起的中断，防止立即唤醒
  // __HAL_IRQ_CLEAR_PENDING(EXTI0_IRQn);

  // 进入睡眠模式，任何中断都能唤醒
  HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
  // 或者使用WFE指令：HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFE);
}

void Device_Info_Init_Fun() {
  deviceInfo.isOnline = FALSE;
  deviceInfo.broadcast_type = 0x02;
  deviceInfo.loraDeviceAddress_H = 0x00;
  deviceInfo.loraDeviceAddress_L = 0x00;
  deviceInfo.powerValue = 0;
  deviceInfo.target_addr_H = 0xFF;
  deviceInfo.target_addr_L = 0xFF;
  deviceInfo.BlDataFlag = BL_IDLE;
  // deviceInfo.newLoraDataFlag = 0;
  // deviceInfo.isReady = 0;
  deviceInfo.loraSendSuccessFlag = 0;
  deviceInfo.commandFromCloud = COMBINE_CMD_STEP(IDLE, STEP_INIT);  //初始化
  //TODO: 大循环，获取设备地址信息，否则重新发送。发送上线信息，等待反馈，否则重新发送上线信息。一切准备就绪后，开启isready为1，进入工作模式。
  // while (1){}
}

// 保留通用框架，但仅处理定时器4
HAL_StatusTypeDef Timer_Managment_Fun(TIM_HandleTypeDef *htim, Timer_Operation op) {
  HAL_StatusTypeDef status = HAL_ERROR;  // 默认返回错误状态

  // 只处理定时器4，其他定时器直接返回错误
  if (htim->Instance != TIM4) {
    printf("错误：仅支持定时器 TIM4\r\n");
    return status;
  }

  if (htim == NULL) {
    printf("错误：定时器句柄为空\r\n");
    return status;
  }

  switch (op) {
    case TIMER_OP_START:
      // 检查定时器4是否处于就绪状态
      if (htim->State == HAL_TIM_STATE_READY) {
        status = HAL_TIM_Base_Start_IT(htim);  // 启动定时器+使能中断
        if (status == HAL_OK) {
          printf("定时器 TIM4 启动成功\r\n");
        } else {
          printf("定时器 TIM4 启动失败，状态码: %d\r\n", status);
        }
      }
      break;

    case TIMER_OP_STOP:
      // 检查定时器4是否正在运行
      if (htim->State == HAL_TIM_STATE_BUSY) {
        status = HAL_TIM_Base_Stop_IT(htim);  // 停止定时器+禁用中断
        if (status == HAL_OK) {
          printf("定时器 TIM4 停止成功\r\n");
        } else {
          printf("定时器 TIM4 停止失败，状态码: %d\r\n", status);
        }
      }
      break;

    default:
      printf("错误：未知的定时器操作类型\r\n");
      break;
  }

  return status;
}

/* USER CODE END 0 */

/**
  * @brief  The application entry point.
  * @retval int
  */
int main(void)
{

  /* USER CODE BEGIN 1 */

  /* USER CODE END 1 */

  /* MCU Configuration--------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_DMA_Init();
  MX_USART1_UART_Init();
  MX_USART2_UART_Init();
  MX_USART3_UART_Init();
  MX_TIM4_Init();
  /* USER CODE BEGIN 2 */
  // 启动 USART2 DMA 接收
  HAL_UART_Receive_DMA(&huart3, rx_buf, sizeof(rx_buf));
  // // HAL_UART_Receive_IT(&huart2, uart2_rx_byte, 7);
  // // 使能 USART2 空闲中断
  __HAL_UART_ENABLE_IT(&huart3, UART_IT_IDLE);
  HAL_UART_Receive_DMA(&huart2, rx_buf_uart2, sizeof(rx_buf_uart2));
  // HAL_UART_Receive_IT(&huart2, uart2_rx_byte, 7);
  // 使能 USART2 空闲中断
  __HAL_UART_ENABLE_IT(&huart2, UART_IT_IDLE);
  printf("开始初始化1\r\n");
  HAL_Delay(4000);
  printf("开始初始化\r\n");
  printf("切换为观察者模式\r\n");
  E104_BT5005A_ROLE_Fun();
  HAL_Delay(2000);
  printf("初始化扫描间隔\r\n");
  E104_BT5005A_SCANINTV_Fun();
  HAL_Delay(2000);
  printf("初始化扫描窗口\r\n");
  E104_BT5005A_SCANWND_Fun();
  HAL_Delay(2000);
  printf("初始化复位\r\n");
  E104_BT5005A_RESET_Fun();
  HAL_Delay(2000);
  Device_Info_Init_Fun();
  printf("开启Lora广播模块\r\n");
  const char *lora_msg = "AT+OPTION=3,0";
  HAL_UART_Transmit(&huart2, (uint8_t *)lora_msg, strlen(lora_msg), HAL_MAX_DELAY);
  HAL_Delay(2000);
  const char *lora_msg1 = "AT+TYPE=1";
  HAL_UART_Transmit(&huart2, (uint8_t *)lora_msg1, strlen(lora_msg1), HAL_MAX_DELAY);
  HAL_Delay(2000);
  const char *lora_msg3 = "AT+HEAD=0";
  HAL_UART_Transmit(&huart2, (uint8_t *)lora_msg3, strlen(lora_msg3), HAL_MAX_DELAY);
  HAL_Delay(2000);
  const char *lora_msg4 = "AT+SRC_ADDR=?";
  HAL_UART_Transmit(&huart2, (uint8_t *)lora_msg4, strlen(lora_msg4), HAL_MAX_DELAY);
  HAL_Delay(2000);

  // uint16_t count = 0;
  // uint16_t randomTime = 0;
  srand(HAL_GetTick());
  // HAL_TIM_Base_Start(&htim4);
  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
  printf("Device is ready\r\n");
  uint8_t i = 0;
  while (1)
  {
    /* USER CODE END WHILE */

    /* USER CODE BEGIN 3 */
    // 命令为IDLE，且步骤为STEP_INIT 说明有新数据。
    if (GET_CMD( deviceInfo.commandFromCloud) == IDLE && GET_STEP(deviceInfo.commandFromCloud) == STEP_VERIFY) {
      E52_Analyze_Data();
    }

    // 检查是否接收到"请求蓝牙数据"命令，且定时器处于就绪状态
    if (GET_CMD( deviceInfo.commandFromCloud)  == REQUEST_BLUETOOTH_DATA && deviceInfo.isOnline) {

      switch (GET_STEP(deviceInfo.commandFromCloud)) {
        case REQUEST_BLUETOOTH_DATA_SCAN:
          Timer_Managment_Fun(&htim4, TIMER_OP_START);
          deviceInfo.BlDataFlag = BL_START;
          printf("开启蓝牙扫描\r\n");
          break;    //扫描蓝牙阶段

        case REQUEST_BLUETOOTH_DATA_SEND:
          Timer_Managment_Fun(&htim4, TIMER_OP_STOP);
          deviceInfo.BlDataFlag = BL_STOP;
          i = 0;
          while (receiveBlDataCount >= i) {

            printf("发送第%d个蓝牙数据给Lora\r\n", i);
            if (deviceInfo.loraSendSuccessFlag == 0) {
              E52_Send_Bl_Data_Fun(i);
            }else {
              continue;
            }
            memset(totalData[i], 0, sizeof(totalData[i]));
            i++;
          }
          deviceInfo.commandFromCloud = COMBINE_CMD_STEP(REQUEST_BLUETOOTH_DATA, STEP_COMPLETE);
          printf("停止蓝牙扫描，开始发送蓝牙数据给Lora\r\n");
          break;          //发送数据阶段
        case STEP_COMPLETE:
          receiveBlDataCount = 0;
          deviceInfo.timeCount = 0;
          deviceInfo.forwardBLAndLoraDataDuration = 0;
          i = 0;
          deviceInfo.commandFromCloud = COMBINE_CMD_STEP(IDLE, STEP_INIT);
          printf("发送结束\r\n");
          break;

        default:
          // 处理未知步骤
          printf("收到未知步骤，忽略处理\r\n");
          break;
      }
    }

    if (GET_CMD( deviceInfo.commandFromCloud)  == E52_HEARTBEAT && deviceInfo.isOnline) {
      switch (GET_STEP(deviceInfo.commandFromCloud)) {
        case HEARTBEAT_SEND:
          if (deviceInfo.loraSendSuccessFlag == 0) {
            E52_Heartbeat_Fun();
          }else {
            continue;
          }
          deviceInfo.commandFromCloud = COMBINE_CMD_STEP(REQUEST_BLUETOOTH_DATA, STEP_COMPLETE);
          break;
        case STEP_COMPLETE:
          deviceInfo.commandFromCloud = COMBINE_CMD_STEP(IDLE, STEP_INIT);
          break;

        default:
          deviceInfo.commandFromCloud = COMBINE_CMD_STEP(IDLE, STEP_INIT);
          printf("收到未知步骤，忽略处理\r\n");
          break;
      }
    }
    // 检查是否接收到"心跳"命令，且设备在线
    if (!deviceInfo.isOnline){
        printf("The device is not online.\r\n");
        if (!deviceInfo.loraSendSuccessFlag) {
          E52_Heartbeat_Fun();
        }
        HAL_Delay(3000);
    }
  }
  /* USER CODE END 3 */
}

/**
  * @brief System Clock Configuration
  * @retval None
  */
void SystemClock_Config(void)
{
  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};

  /** Initializes the RCC Oscillators according to the specified parameters
  * in the RCC_OscInitTypeDef structure.
  */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
  RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
  {
    Error_Handler();
  }

  /** Initializes the CPU, AHB and APB buses clocks
  */
  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;

  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
  {
    Error_Handler();
  }
}

/**
  * @brief TIM4 Initialization Function
  * @param None
  * @retval None
  */
static void MX_TIM4_Init(void)
{

  /* USER CODE BEGIN TIM4_Init 0 */

  /* USER CODE END TIM4_Init 0 */

  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
  TIM_MasterConfigTypeDef sMasterConfig = {0};

  /* USER CODE BEGIN TIM4_Init 1 */

  /* USER CODE END TIM4_Init 1 */
  htim4.Instance = TIM4;
  htim4.Init.Prescaler = 71;
  htim4.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim4.Init.Period = 999;
  htim4.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  htim4.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE;
  if (HAL_TIM_Base_Init(&htim4) != HAL_OK)
  {
    Error_Handler();
  }
  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
  if (HAL_TIM_ConfigClockSource(&htim4, &sClockSourceConfig) != HAL_OK)
  {
    Error_Handler();
  }
  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  if (HAL_TIMEx_MasterConfigSynchronization(&htim4, &sMasterConfig) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN TIM4_Init 2 */

  /* USER CODE END TIM4_Init 2 */

}

/**
  * @brief USART1 Initialization Function
  * @param None
  * @retval None
  */
static void MX_USART1_UART_Init(void)
{

  /* USER CODE BEGIN USART1_Init 0 */

  /* USER CODE END USART1_Init 0 */

  /* USER CODE BEGIN USART1_Init 1 */

  /* USER CODE END USART1_Init 1 */
  huart1.Instance = USART1;
  huart1.Init.BaudRate = 115200;
  huart1.Init.WordLength = UART_WORDLENGTH_8B;
  huart1.Init.StopBits = UART_STOPBITS_1;
  huart1.Init.Parity = UART_PARITY_NONE;
  huart1.Init.Mode = UART_MODE_TX_RX;
  huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
  huart1.Init.OverSampling = UART_OVERSAMPLING_16;
  if (HAL_UART_Init(&huart1) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN USART1_Init 2 */

  /* USER CODE END USART1_Init 2 */

}

/**
  * @brief USART2 Initialization Function
  * @param None
  * @retval None
  */
static void MX_USART2_UART_Init(void)
{

  /* USER CODE BEGIN USART2_Init 0 */

  /* USER CODE END USART2_Init 0 */

  /* USER CODE BEGIN USART2_Init 1 */

  /* USER CODE END USART2_Init 1 */
  huart2.Instance = USART2;
  huart2.Init.BaudRate = 115200;
  huart2.Init.WordLength = UART_WORDLENGTH_8B;
  huart2.Init.StopBits = UART_STOPBITS_1;
  huart2.Init.Parity = UART_PARITY_NONE;
  huart2.Init.Mode = UART_MODE_TX_RX;
  huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
  huart2.Init.OverSampling = UART_OVERSAMPLING_16;
  if (HAL_UART_Init(&huart2) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN USART2_Init 2 */

  /* USER CODE END USART2_Init 2 */

}

/**
  * @brief USART3 Initialization Function
  * @param None
  * @retval None
  */
static void MX_USART3_UART_Init(void)
{

  /* USER CODE BEGIN USART3_Init 0 */

  /* USER CODE END USART3_Init 0 */

  /* USER CODE BEGIN USART3_Init 1 */

  /* USER CODE END USART3_Init 1 */
  huart3.Instance = USART3;
  huart3.Init.BaudRate = 115200;
  huart3.Init.WordLength = UART_WORDLENGTH_8B;
  huart3.Init.StopBits = UART_STOPBITS_1;
  huart3.Init.Parity = UART_PARITY_NONE;
  huart3.Init.Mode = UART_MODE_TX_RX;
  huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE;
  huart3.Init.OverSampling = UART_OVERSAMPLING_16;
  if (HAL_UART_Init(&huart3) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN USART3_Init 2 */

  /* USER CODE END USART3_Init 2 */

}

/**
  * Enable DMA controller clock
  */
static void MX_DMA_Init(void)
{

  /* DMA controller clock enable */
  __HAL_RCC_DMA1_CLK_ENABLE();

  /* DMA interrupt init */
  /* DMA1_Channel3_IRQn interrupt configuration */
  HAL_NVIC_SetPriority(DMA1_Channel3_IRQn, 0, 0);
  HAL_NVIC_EnableIRQ(DMA1_Channel3_IRQn);
  /* DMA1_Channel6_IRQn interrupt configuration */
  HAL_NVIC_SetPriority(DMA1_Channel6_IRQn, 0, 0);
  HAL_NVIC_EnableIRQ(DMA1_Channel6_IRQn);

}

/**
  * @brief GPIO Initialization Function
  * @param None
  * @retval None
  */
static void MX_GPIO_Init(void)
{
  /* USER CODE BEGIN MX_GPIO_Init_1 */

  /* USER CODE END MX_GPIO_Init_1 */

  /* GPIO Ports Clock Enable */
  __HAL_RCC_GPIOD_CLK_ENABLE();
  __HAL_RCC_GPIOA_CLK_ENABLE();
  __HAL_RCC_GPIOB_CLK_ENABLE();

  /* USER CODE BEGIN MX_GPIO_Init_2 */

  /* USER CODE END MX_GPIO_Init_2 */
}

/* USER CODE BEGIN 4 */

/* USER CODE END 4 */

/**
  * @brief  Period elapsed callback in non blocking mode
  * @note   This function is called  when TIM3 interrupt took place, inside
  * HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment
  * a global variable "uwTick" used as application time base.
  * @param  htim : TIM handle
  * @retval None
  */
void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
{
  /* USER CODE BEGIN Callback 0 */

  /* USER CODE END Callback 0 */
  if (htim->Instance == TIM3)
  {
    HAL_IncTick();
  }
  /* USER CODE BEGIN Callback 1 */

  /* USER CODE END Callback 1 */
}

/**
  * @brief  This function is executed in case of error occurrence.
  * @retval None
  */
void Error_Handler(void)
{
  /* USER CODE BEGIN Error_Handler_Debug */
  /* User can add his own implementation to report the HAL error return state */
  __disable_irq();
  while (1)
  {
  }
  /* USER CODE END Error_Handler_Debug */
}
#ifdef USE_FULL_ASSERT
/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t *file, uint32_t line)
{
  /* USER CODE BEGIN 6 */
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
  /* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */