lora_bl/Core/Src/E52.c

//
// Created by EDZ on 25-9-11.
//

#include "../Inc/E52.h"

Device_structure deviceInfo;
/**
 *
 *设备向后台发生数据
 * 帧头：55 AA
 */
void E52_Heartbeat_Fun() {
    printf("这是心跳包");
    Heartbeat_structure heartbeat_structure;

    heartbeat_structure.frame_header_H = 0x55;
    heartbeat_structure.frame_header_L = 0xAA;
    heartbeat_structure.function_code = 0x01;
    heartbeat_structure.badge_addr_high = deviceInfo.loraDeviceAddress_H;
    heartbeat_structure.badge_addr_low = deviceInfo.loraDeviceAddress_L;
    heartbeat_structure.broadcast_type = deviceInfo.broadcast_type;
    heartbeat_structure.target_addr_H = deviceInfo.target_addr_H;
    heartbeat_structure.target_addr_L = deviceInfo.target_addr_L;
    heartbeat_structure.frame_tail_H = 0xFF;
    heartbeat_structure.frame_tail_L = 0xEE;

    printf("heartbeat size = %d\n", sizeof(heartbeat_structure));

    HAL_UART_Transmit(&huart2, (uint8_t *)&heartbeat_structure, sizeof(heartbeat_structure), HAL_MAX_DELAY);
    // TODO: command:01
}

void E52_Send_Bl_Data_Fun() {
    printf("这是发送蓝牙数据");
    SendBlData_structure sendBlData_structure;
    sendBlData_structure.frame_header_H = 0x55;
    sendBlData_structure.frame_header_L = 0xAA;
    sendBlData_structure.function_code = 0x02;
    sendBlData_structure.badge_addr_high = deviceInfo.loraDeviceAddress_H;
    sendBlData_structure.badge_addr_low = deviceInfo.loraDeviceAddress_L;
    memcpy(sendBlData_structure.bl_data, rx_buf, 8);
    sendBlData_structure.finish_send = 0x01;
    sendBlData_structure.frame_tail_H = 0xFF;
    sendBlData_structure.frame_tail_L = 0xEE;
    printf("blData size = %d\n", sizeof(sendBlData_structure));

    HAL_UART_Transmit(&huart2, (uint8_t *)&sendBlData_structure, sizeof(sendBlData_structure), HAL_MAX_DELAY);
    // TODO: command:02
}

void E52_Send_SOS_Fun() {
    printf("这是发送SOS数据");
    // TODO: command:04
}

/**
 *
 *后台向设备发送数据
 * 帧头：55 BB
 */
void E52_Request_Command_Fun() {
    printf("这是请求蓝牙数据的命令");
    // TODO: command:03
}

void E52_Configuration_Fun() {
    printf("这是配置lora发送方式的命令");
    // TODO: command:07
}

void E52_Send_Sleep_Fun() {
    printf("这是让设备睡眠的命令");
    // TODO: command:05
}

void E52_Heartbeat_Fun1() {
    printf("这是让设备重新发送点卯命令");
    // TODO: command:08
}


void E52_Analyze_Command_Fun() {
    printf("这是解析命令的");
     if (rx_buf_uart2[2] == 0x01) {
        // E52_Heartbeat();
         // todo:心跳包命令
    }else if (rx_buf_uart2[2] == 0x02) {
        //todo:发生蓝牙数据
    }else if (rx_buf_uart2[2] == 0x03) {
        //todo:
    }else {

    }
}


void E52_Analyze_Data() {
    // uint16_t received_len = sizeof(rx_buf_uart2) - __HAL_DMA_GET_COUNTER(huart2.hdmarx);
    printf("loraDeviceAddress: 0x%02X 0x%02X\r\n", deviceInfo.loraDeviceAddress_H,deviceInfo.loraDeviceAddress_L);
    if (rx_buf_uart2[0] == 0x55 && rx_buf_uart2[1] == 0xBB) {
        printf("The data is command\r\n");
    }else if (strncmp((char *)rx_buf_uart2, "SUCCESS", 7) == 0) {
        printf("The data is a callback\r\n");
    }else if (rx_buf_uart2[0] == 'A' && rx_buf_uart2[1] == 'T') {
        printf("The data is AT data\r\n");
    }else {
        printf("The data is other data\r\n");
    }
    // 清空缓冲区（可选）
    memset(rx_buf_uart2, 0, sizeof(rx_buf_uart2));
    // 重新开启 DMA 接收
    HAL_UART_Receive_DMA(&huart2, rx_buf_uart2, sizeof(rx_buf_uart2));
}